Element: Dynamic Neodymium magnet structure
Frequency Response 50 Hz to 18 kHz
Polar Pattern Cardioid
Impedance: Low-Z balanced (600 Ohms)
Microphone Connector: 3-pin, XLR-type
Polarity: Pin 2 positive, referenced to pin 3 w/positive pressure on diaphragm
Finish: Durable polyurethane paint
Materials: Die cast zinc housing
Length 6.7 in. (170 mm)
Diameter 2.1 in. (53 mm)
Shank .85 in. (22 mm)
Net 11.7 oz. (332 grams)
Shipping 29.8 oz. (845 grams)
Accessories included Stand adaptor (black)
Gig bag The Co7 is the perfect choice for the performer who wants hassle free sound -a mic that performs in high volume situations without feedback.Built to the same standards of EV 's N/DYM microphones,this mic 's low handling noise also makes it ideal in critical acoustic settings. Microphone Use & Placement Please note that miking techniques are a matter of personal preference.These are merely guidelines to assist in the placement of the microphone to gain optimal performance. Usage Optimal Placement Vocals Zero to six inches from the windscreen, & on axis w/the microphone. Spoken Word Five to ten inches from the windscreen, & on axis w/microphone Standard Placement & Use Guidelines 1.Always point the microphone @ the desired source of sound,and away from any unwanted sources. 2.The microphone should be located close to the sound source to minimize interference from other potential sound sources. 3.Use the 3-to-1 rule when using multiple microphones. Place each microphone three times farther from other microphones as from the desired sound source. 4.Minimize over-handling of the microphone to reduce unwanted mechanical noise. 5.Working close to the microphone will increase the bass tone & also provide increased gain-before-feedback.